VINTAGETRACTORS.COM
AND
RUSTY ACRES RANCH
John Deere GP Parts
For faster page loading, GP parts are divided onto
the following pages:
GP Engine Parts
GP Transmission, Brake, Final
Drive, and Rear Axle Parts
GP Front End, Steering, and
Wheel Parts
GP External Parts: Radiator,
Sheet Metal, Drawbar
Useable C301R block, 185 lb. (can not ship by UPS),
bores measure 5.838, $250
C301R block, 185 lb. (can not ship by UPS), bored .090
over, no breaks or reapirs, but valve seat and front part of both
bores are very pitted, $115
C2109R Valve spring, $10 each
C624R Cam follower, 4 available, $12 each or 4 for
$40
C295R manifold, no breaks or repairs, but the 4 broken
studs will need to be removed, $100
C250R head, some pitting inside, but no breaks or repairs,
good and useable head, $150
Head, C250R, have freeze cracks in water jacket as
highlighted in orange, interior appears to be okay, sold as-is,
$40
.090 over pistons, C1882R, Slight pitting on top, smooth
on sides, very nice, $125/pair
C226R connecting rods, good condition, 3 available,
$60 each
Piston pins, 4 available, $15 each
Crankshaft, C225R, very good condition, $150 (90 lb)
Another C225R crankshaft in very good condition, $150
LH main bearing housing, AC161R, C33R, with cap and
bearings, $50
RH Main bearing housing, AC162R, C32R, with cap and bearings,
$50
C35R, $10
C138R, Oil Slinger, $18
Oil pump aassembly, $95
Oil suction pipe, $8
Engine oil lines, $10 each or $28 for all four
"Redhead" oil pressure indicator, good condition,
$35
AC564R Camshaft, $75
AC276R Cam gear, C304R, $95
AC81R and AC80R Cam bearing holders, $30 for the pair
GP magneto base, C1016R, $15
Governor assembly with C306R case, $125
Another governor assembly with C306R case, gears are
in excellent condition, $125
Throttle control assembly, as shown, $50
C307R Water pipe with fan bearing, $75
Fan shaft assembly with bevel gear and C1525R fan shaft, $75
Fan shaft assembly with bevel gear and C1525R fan shaft,
$60
C171R Clutch fork and D100R collar, $60
Clutch throwout shaft and lever, AC237R, $50
C172R, $20
AC130R Pulley, complete with dogs, toggle, bolts, bearings,
etc. $160
Another AC130R clutch pulley, complete with dogs, toggle,
bolts, bearings, etc. $160
C142R, Clutch adjusting disk, $30, your choice
D377R Springs for clutch adjusting disk, $15/set
AC699R, Dust shield, $35
C957R, $10
C184R, Pulley and spline gear cover, $35 (45 lb)